Aquanello Eterna Chrome-Look Stainless Steel Faucet ET4001-01

The Aquanello Eterna cold-water chrome-look toilet fountain faucet ET4001-01 is a compact and stylish faucet for a toilet fountain or small sink. The faucet combines the minimalist design of the Eterna series with the bright and luxurious look of mirror-polished stainless steel.

The faucet is crafted from high-quality stainless steel. For the -01 color finish, the visible stainless steel is polished to a very smooth, mirror-like finish. This creates a high-quality chrome-look with a highly glossy and reflective surface.

Important: The ET4001-01 is not traditionally chrome-plated. The chrome-like finish is achieved by mirror-polishing the stainless steel itself. Therefore, no separate chrome layer or PVD color coating is applied.

Cold-water faucet for toilets and sinks

The Aquanello Eterna ET4001-01 is specifically designed as a cold-water faucet. The faucet is connected to a single cold-water line and does not mix hot and cold water.

The slim control at the top allows the water flow to be easily turned on, turned off, and adjusted.

The faucet is suitable for, among other things:

• Toilet sinks
• Guest bathrooms
• Small sinks
• Restrooms with cold-water-only connections

Chrome finish thanks to mirror-polished stainless steel

The color code -01 on this Aquanello Eterna model indicates a mirror-polished stainless steel finish.

The surface of the stainless steel is very finely polished until a smooth and highly reflective finish is achieved. This gives the faucet the classic high-gloss appearance of chrome, while the visible material itself remains stainless steel.

• Base material: Stainless steel
• Finish: Mirror-polished
• Appearance: Chrome-like / high-gloss
• Traditional chrome plating: No
• PVD: No

Compact height of approximately 179 mm

The ET4001-01 has a total height of approximately 179 mm. This keeps the faucet compact and makes it particularly suitable for smaller sinks and washbasins.

The spout opening is located approximately 88 mm above the mounting surface, leaving ample space for comfortable use.

Fixed spout of approximately 118 mm

The sink faucet has a fixed spout with a length of approximately 118 mm. This directs the water stream toward the center of the sink or washbasin.

The tip of the spout is angled downward at approximately 27°. This ensures that the water is directed toward the basin in a controlled manner.

Fixed, non-swivel spout

The spout of the ET4001-01 does not swivel. This keeps the faucet construction compact and stable and ensures the design retains its sleek, minimalist look.

During installation, the faucet is therefore positioned directly in the correct orientation relative to the sink or washbasin.

No coating, just polished stainless steel

In this version, the shiny chrome look is not achieved through a decorative coating, PVD layer, or traditional chrome plating.

Instead, the stainless steel surface is mechanically polished to a very smooth and mirror-like finish. This ensures that the stainless steel remains the visible surface of the faucet.

The result is a bright and luxurious appearance that pairs perfectly with other high-gloss plumbing fixtures.

Characteristics of mirror-polished stainless steel

• Genuine stainless steel: the stainless steel forms the visible surface
• Mirror-polished: extremely smooth and highly reflective
• Chrome-like finish: classic high-gloss bathroom aesthetic
• No PVD: no decorative PVD color coating
• Not traditionally chrome-plated: no separate chrome layer over the stainless steel
• Timeless look: suitable for modern and classic interiors

Care of mirror-polished stainless steel

Water droplets and fingerprints are generally more visible on a mirror-polished surface than on brushed stainless steel. Wiping it down regularly helps maintain the bright shine.

We recommend cleaning the faucet with a soft, damp cloth and, if desired, polishing it dry with a soft cloth.

Avoid abrasive sponges and harsh, highly acidic, or alkaline cleaning agents, as these can damage the polished surface.

1-hole sink or countertop mounting

The ET4001-01 is designed for 1-hole installation on a pedestal sink, countertop sink, or compatible countertop.

The mounting diameter is approximately Ø35 mm. This allows the faucet to be installed in a pre-drilled faucet hole.

After installation, the round faucet base ensures a clean transition between the faucet and the mounting surface.

Compact single-lever control

The cold-water faucet is operated by a slim, cylindrical lever on the top. This allows the water flow to be easily turned on, turned off, and adjusted.

The control lever is approximately 35 mm long and has a diameter of approximately Ø8 mm. This ensures that the control remains subtly integrated into the design.

No waste system

The ET4001-01 does not feature an integrated control for the sink drain. A matching sink plug can be selected separately.

This allows the drain to be fully customized to match the selected faucet, sink, and desired color scheme.

Minimalist Eterna design

The Aquanello Eterna series is characterized by sleek cylindrical shapes, rounded lines, and minimalist details. The ET4001-01 follows this design style with a compact faucet body, curved spout, and slender controls.

The mirror-like chrome finish pairs easily with a variety of materials, such as:

• White ceramic
• Marble
• Natural stone
• Travertine
• Concrete-look
• Wood and wood-look

Key features

• Brand: Aquanello
• Series: Eterna
• Model: ET4001-01
• Color code: -01
• Product Type: Sink Faucet / Cold Water Faucet
• Color: Chrome finish
• Base material: Stainless steel
• Surface finish: Mirror-polished stainless steel
• Appearance: High-gloss / mirror-like
• Traditionally chrome-plated: No
• PVD: No
• Water connection: Cold water
• Mixing faucet: No
• Thermostatic: No
• Total height: approx. 179 mm
• Spout length: approx. 118 mm
• Spout height: approx. 88 mm
• Spout angle: approx. 27° downward
• Swivel spout: No
• Number of faucet holes: 1
• Mounting diameter: approx. Ø35 mm
• Installation: Sink / countertop mounting
• Operation: Manual
• Number of handles: 1
• Control lever length: approx. 35 mm
• Control lever diameter: approx. Ø8 mm
• Drain system: No
• Self-closing: No
• Application: Toilet fountain / small sink
• Style: Modern / timeless / minimalist
• Warranty: 5 years

Compact sink faucet in mirror-polished stainless steel with a chrome finish

The Aquanello Eterna ET4001-01 combines the compact dimensions of a lavatory faucet with the bright and luxurious look of mirror-polished stainless steel.

The combination of a 179 mm height, a 118 mm fixed spout, and a high-quality mirror-polished stainless steel finish creates a stylish and timeless cold-water faucet.

Because the chrome-like finish is achieved directly by mirror-polishing the stainless steel, the stainless steel itself remains the visible finish. An elegant choice for a modern or classic restroom where a high-quality, glossy sink faucet is desired.